User Manual

SELF-LEVELING 360-DEGREE CROSS LINE LASER 3
SAFETY INSTRUCTIONS
Safety Instructions for Self-Leveling 360-Degree Cross Line Laser
WARNING
LASER RADIATION. Do not stare into beam. Class
II laser product. Turn the laser beam on only when
using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure. The laser beam can
cause ash blindness.
• Do not operate the tool around children or allow
children to operate the tool.
• Do not place the tool in a position that may
cause anyone to stare at the laser beam,
whether intentionally or unintentionally.
• Do not use on surfaces, such as sheet steel, that have shiny, reective
surfaces. The shiny surface could reect the beam back at the operator.
• Always turn the laser tool off when not in use. Leaving the tool on
increases the risk of someone inadvertently staring into the laser beam.
• Do not attempt to modify the performance of this laser device in any way.
This may result in a dangerous exposure to laser radiation.
• Do not attempt to repair or disassemble the self-leveling 360-degree cross
line laser. If unqualied persons attempt to repair this product, serious injury
may occur. Any repair required on this laser product should be performed only
by qualied service personnel.
• Use of other accessories that have been designed for use, with other laser
tools could result in serious injury.
• Do not place or store tool under extreme temperature conditions.
CAUTION
PRECAUCIÓN
CAUTION
PRECAUCIÓN
MADE IN CHINA
SERIAL NO.
SERIE NO.
HECHO EN CHINA
Model / Modelo : HLCL360
6V 4×1.5 V AA Battery
6V Batería AA 4×1,5 V
Self-Leveling 360-Degree Cross Line Laser
Láser autonivelante de líneas cruzadas de 360 grados
AVOID EXPOSURE-
EVITE LA EXPOSICIÓN-
Laser radiation is emitted
from this aperture
La radiación láser se emite
de esta abertura