Energy 2- User Guide

7. Before the first start

7.1 Mounting the SIM card.

The device is a cellular phone made in Dual SIM technology (2 SIM cards

handling) allowing the use of two mobile networks simultaneously. To insert the

SIM card/s correctly one has to:

• Switch off the phone.

• Open the rubber, water-proof cover (8).

• Use the supplied tool to open (insert the tip energetically into the hole) and

slide out the card tray (8).

• Insert the SIM card/s into the slot in accordance with the picture beneath.

• Gently slide in the card tray and close the moisture-proof cover securely.

7.2 Installation of the memory card

To insert the memory card correctly one has to:

• Switch off the phone.

• Open the rubber water-proof cover (8).

• Use the supplied tool to open (insert the tip energetically into the hole) and

slide out the card tray (8).

• Insert the memory card into the slot as shown in the picture below (instead

of the nanoSIM1 card).

• Gently slide in the card tray and close the moisture-proof cover securely.

Use only memory cards recommended by the manufacturer. Pay attention to

the selection of the proper format - the microSD card, capacity and type/class.