User manual

Wireless AP Router HNW300APN2
User Manual 8
2.2 Connectors
The below table shows the function of each connector and switch of the device.
CONNECTOR
DESCRIPTION
POWER
Connects to the supplied power cable
LAN 1/2/3/4
Connects the device via Ethernet to up to four PCs on your LAN
WAN
Connects the device via Ethernet to xDSL / Cable Modem
WPS
Press this button for at least three full seconds and the WPS LED will flash to start WPS.
ON/OFF
SWITCH
Power on/off the device
RESET
Press this button to reset the Wi-Fi Router to its default factory settings.
Rear View of the Wireless AP Router
Side view with WPS button and ON/OFF switch
Bottom view with RESET button