User Manual

14
AudioAce™ Portable Bluetooth
®
CD Player
Playing Audio Via Bluetooth
®
:
1. When Bluetooth
®
has been successfully paired, press the Play/Pause/
Pair button to play or pause music from your unit.
2. Press /Tune+ /Tune- or button to jump to next/previous
music track.
3. Music can also be controlled from the Bluetooth
®
-enabled device.
Incoming Call:
The volume of the music will automatically lower when you have an
incoming call. When the call is complete, the music will resume at the
original set volume.
Using AUX-In (line in)
Requires a 3.5mm cable (not included), and external media player
(not included)
1. Press the Source button to select AUX mode.
2. Plug a 3.5mm audio cable into your external media player
(via the headphone jack or AUX out or Line out).
3. Plug the other end of the cable to the AUX-In jack of the unit.
4. Make sure both units are turned on.
5. Use the controls on the connected media player to select and play audio.
6. Music can only be controlled from the media player.
Listening to a Cassette
Insert or Remove a Cassette Tape:
1. To insert your cassette tape: Press the Stop/Eject button to open
the cassette door. Insert your cassette tape into the compartment with the
exposed section of the tape facing upward. The side that you wish to listen
to record onto should be facing towards you. Push the cassette door unit it
locks in place.
2. To remove your cassette tape: Press the Stop/Eject button to open
the door then lift the cassette out.