Coffee Urn English........................................
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. Care must be taken, as burns can occur from touching hot parts or from spilled, hot liquid. 3. To protect against fire, electric shock, and injury to persons do not place cord, plug or coffee urn in water or other liquid. 4.
4. Place cover onto coffee urn and turn to lock. 5. Plug cord into the coffee urn then plug the cord into electrical outlet. The unit automatically turns on. 6. The coffee urn will stop automatically when the coffee has finished brewing, and the Ready light will glow. Allow about 1 minute per cup for brewing time. 7. Using a hot mitt, remove cover then carefully remove coffee basket with HOT grounds and stem. Replace cover. 8. The coffee urn will remain at serving temperature until it is unplugged.
NOTE: We recommend using coffee that has been ground specifically for use in a percolator-type coffee maker. However, coffee marked “For All Coffee Makers” is acceptable. If using a coffee grinder and whole beans, percolator coffee should be a coarse grind. A finely ground coffee may cause the coffee basket to overflow. 4. Drain the soapy water then fill the coffee urn with hot water to rinse. Open serving spout and let hot water flow through to clean the spout.
Customer Service If you have a question about your coffee urn, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your coffee urn. This information will help us answer your question much more quickly.