User Manual

5
Wash all removable parts in warm,
soapy water. No parts may be washed
in a dishwasher.
The water pump must be “primed”
before first use to work properly.
Operating without water in the Water
Reservoir can permanently damage the
appliance.
Before First Use (Priming the Pump)
4. When unit is ready, the light next to
the Temperature Selection button will
come on. Place an empty container
under Frothing Nozzle so that nozzle is
completely inside container.
5. Turn the Steam Control Dial
counterclockwise to STEAM (
).
Press Pump Button to pump hot water
out of Frothing Nozzle for cleaning
purposes.
6. Fill the container about halfway
full. NOTE: The green light next to
Temperature Selection button will go
off once Pump Button is pushed.
7. Press Pump Button again to turn
Frothing Nozzle off; then turn Steam
Control Dial clockwise to NO STEAM
( ).
2. Fill the Removable Water Reservoir to
the MAX fill line with cold water and
replace securely on the back of unit.
1. Make sure all three buttons are in the
OFF position (not pushed in) and that
the Steam Control Dial is turned fully
clockwise to NO STEAM (
).
3. Plug into outlet. Press ON/OFF button
to turn unit on.
w WARNING
Electrical Shock Hazard. Do not
immerse machine, cord, or plug in water or any other liquid.