User's Manual

This confidential document is the property of HAMGSHING Industry Co., Ltd. and must not be copied or circulated without permission

BLUETOOTH HANDS-FREE CAR KIT

OPERATING INSTRUCTIONS

*This Bluetooth hands-free car kits can only be used after paired with

Bluetooth cellular phone*

I. PAIRING BETWEEN BLUETOOTH HANDS-FREE CAR KIT AND

BLUETOOTH cellular phone (There are two pairing mode for the

cellular phone, i.e. headset and hands-free)

Under the condition of Bluetooth hands-free car kit near to Bluetooth

cellular phone (less than 10 meters)

1． At standby status, press control button for 3 seconds or more

and rotate it clockwise, you will access headset pairing mode.

2． At headset pairing mode, the blue indicator flashes and orange

indicator goes out.

3． After successful pairing and when at standby status, if

connection between Bluetooth hands-free car kit and Bluetooth

cellular phone has been made, the blue indicator lights up

continuously and the orange indicator goes out.

4． During pairing, press control button for 3 seconds or more, you

can cancel pairing process and the system resumes to standby

status.

Note: Typically there are different operations for cellular phone from

different manufacturers. (However, there are basically the same operations for

different models from the same manufacturer.) The pairing, connecting, and

switching during call for Bluetooth hands-free car kit and Motorola, Nokia and

Ericsson Bluetooth cellular phone are described as follows.