User's Manual

Pairing between Bluetooth Car-kit and Bluetooth phone
* This Bluetooth hands free car kit can only be used after paired with
Bluetooth cell phone.
Pairing makes Bluetooth wireless link between hands free car kit and
cell phone.
PAIRING BETWEEN BLUETOOTH HANDS FREE CAR KIT AND
BLUETOOTH CELL PHONE
INITIAL PAIRING: With hands free car kit installed in vehicle and
Bluetooth cell phone being close to the kit, start vehicle:
1． Press function button for more than 4 seconds and release it
blue indicator flashes per 0.5 second. This indicates that the kit
is in headset pairing mode
2． Press function button for more than 6 seconds or till blue
indicator flashes per 1 second. This indicates that the kit is in
hands free pairing mode.
3． Operate cell phone to realize link: For NOKIA 8910:
Enter into function menu → Select Data Link → Select
Bluetooth → Select Search for Audio Device → (If correlative
Bluetooth device is detected, the name of the correlative
Bluetooth device is displayed). Select this device → Enter code
0000
Pairing is completed.
Note: See page 9 for detailed pairing method for some common
brands of phone.
4． After pairing completed, during hands free car kit linking with
Bluetooth phone, the blue indicator is on and orange indicator is
off.
5． During pairing, if you click function button, the pairing operation
will be cancelled and the kit resumes to standby status.
7
Connection/Disconnection
CONNECTION
AUTOMATIC CONNECTION: After initial pairing has been made, the
hands free car kit will remember the ID of phone. Every time when
the vehicle is started, the hands free car kit will automatically search
for the Bluetooth cell phone last used. The blue indicator is off and
the orange indicator flashes. After wireless link is established, the
blue indicator is on and the orange indicator is off.
*Note: If Bluetooth cell phone is powered off during car being started,
the automatic link will not be made
even if the phone is powered on
after starting car is over.
MANUAL CONNECTION
1
． When the hands free car kit is in standby mode and isn’t
connected with Bluetooth cell phone after pairing, you can click
function button to make Bluetooth hands free car kit search for paired
phone. At this moment, the orange indicator is on and the blue
indicator is off. After the connection is established, the blue indicator is
on and the orange indicator is off.
2． With hands free car kit in standby mode and not connected
with Bluetooth cell phone after pairing, you can operate phone to
establish Bluetooth link. Refer to the Bluetooth section of operation
instructions for phone for detailed operation method.
*This hands free car kit can storage three sets of pairing information
maximum.
CANCEL SEARCHING: You can press the function button to cancel
searching and to let the kit resume to standby status during hands
free car kit searching for Bluetooth cell phone.
DISCONNECT THE HANDS FREE CAR KIT WITH BLUETOOTH CELL
PHONE
1． With hands free car kit in standby status and connected with cell
phone, you can press the function button for more than 6 seconds
to disconnect the hands free car kit with Bluetooth cell phone.
2． If vehicle is turned off, the hands free car kit will automatically be
disconnected with Bluetooth cell phone.
8