Bluetooth® Music Port HamgShing KBA100N User Guide
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
[ Product pictures ] [Picture of KBA-100N and accessories] Getting Started Powering the KBA100N 1. Plug the included AC power supply into the Power Jack on the Music Port. 2. Plug the other end of the AC power supply into an appropriate wall outlet. Connecting your audio input/output to the KBA100N 1. Connect the “Audio Out” jacks of the Music Port to a normal stereo headset or “Audio In” jacks on your home stereo system. 2.
Using KBA100N as a Bluetooth stereo audio receiver As a receiver, the Music Port receives the audio wirelessly from a Bluetooth audio transmitter and pumps it out of its “Audio Out” jack. 1. Pair with a neighbouring Bluetooth audio transmitter. - Place the Bluetooth audio transmitter close to the Music Port and put it into pairing mode. Note: The Bluetooth audio transmitter can be a A2DP-capable mobile phone or PC. Please refer to the user manual of these devices on how to put them into pairing mode.
KBA100N functions Function Action Turn on Music Port Short-press or press and hold “PWR” button for 3 seconds. Turn off Music Port Press and hold “PWR” button for 3 seconds. Change mode Short-press “PWR” button to select different working modes. Enter Pairing mode Short-press “PAIR” button to go into pairing when in “Transmitter” mode and idle state (neither pairing nor streaming audio). Press and hold “PAIR” button for 3 seconds to go into pairing when in “Receiver” mode and idle state.
