User Manual

ManualsBrandsHamee ManualsAudio EquipmentBluetooth Stereo Speaker

SP02 Stereo Bluetooth Speaker User Manual

Operating Instructions

Power On

When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The

LED indicator will flash slowly in blue.At this time you will hear “power on” from the

speaker . The speaker will be paired with the last connected bluetooth device or mobile

phone automatically when turned on.

Power Off

When the speaker is on, press and hold the MFB for 4 seconds,you will hear a tone. The

LED indicator will flash slowly in red. At this time,you will hear “ power off “ from the

speaker . The speaker will disconnect from your phone devices when turned off.

Pairing Mode

When the speaker is OFF,(And confirm the line in port without 3.5mm audio cable) press

and hold MFB for 6 seconds until the LED indicator flashes red and blue in alternating

colors,and you will hear “ pairing” from the speaker.When the speaker connect with your

device,you will hear”pairing completed,connected”.

Notes: If you release the MFB before the speaker goes into pairing mode,the speaker

will enter the power ON state. Needs to be OFF again to operate the speaker. or press the

vol+ and vol- button concurrently to go into pairing mode again.

3mins pairing time,if not connect with any device,it will quit pairing mode and you will hear

“pairing not completed” from speaker.

Easy connection function

If the speakert doesn’t connect with any phones when it is on, you can enter into speed

pairing mode by pressing the vol+ and vol- button concurrently and connect with your

phone.

FCC ID:2AD2XSP02

Summary of content (5 pages)

PAGE 1
SP02 Stereo Bluetooth Speaker User Manual FCC ID:2AD2XSP02 Operating Instructions Power On When the speaker is off, press and hold the Multi-function Button(MFB) for 3 seconds,The LED indicator will flash slowly in blue.At this time you will hear “power on” from the speaker . The speaker will be paired with the last connected bluetooth device or mobile phone automatically when turned on. Power Off When the speaker is on, press and hold the MFB for 4 seconds,you will hear a tone.
PAGE 2
Answering Calls If a call comes in when listening to music or speaker is standing by, you will hear “incoming call “ from the speaker.press the MFB to answer the incoming call. If the music is playing, it will pause automatically during the call. After finishing your call, the music will start playing automatically. Reject Calls If a call comes in when listening to music or speaker is standing by, press and hold the MFB for 2 seconds to reject the incoming call.
PAGE 3
If your mobile phone supports this function, press and hold backward button/ forward button for 2 seconds to activate voice command. If the speakert is playing music, the music will be paused automatically during this time. By double click MFB during the voice dial mode, voice dial will be canceled. Note: Please refer to the manual of your mobile phone for voice-command dial support. Connect with 2 mobile phones A. First disconnect the Bluetooth device from your phone if it is already connected. B.
PAGE 4
Standby Time: 100 hours Operating Temperature: -20-60 °C Device ID: ZB-VAULT Pin Code: 0000 Charging Red LED Light Charging Complete Red LED light turn off Stand by Blue LED light flashes twice every 5 seconds Power On (Talking) Blue LED light flashes twice every 3 seconds Power On (Incoming Call) Blue LED light flashes continuously Power On (Not Connected) Blue LED light flashes once every 5 seconds Battery Low Red LED light flashes once every 5 seconds Pairing Mode LED light flashes in red
PAGE 5
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.