Operating instructions

WLAN 300 Mbps Repeater

Note – Timer rule example

► You want the repeater to switch the WLAN on at 8:00 AM on Monday, Tuesday and

Thursday and switch it off at 8:00 PM on these days.

► Switch-on rule:

• Select the days Monday, Tuesday and Thursday by clicking on the

corresponding boxes so that a check appears.

• For the time, enter 08 for the hour and 00 for the minutes.

• Ensure that you have selected the WLAN on command.

• Then click on Add. The table at the bottom now displays the setting

you just made.

► Switch-off rule:

• Select the days Monday, Tuesday and Thursday again by clicking on

the corresponding boxes so that a check appears.

• For the time, enter 20 for the hour and 00 for the minutes.

• Ensure that you have selected the WLAN off command.

• Then click on Add. The table at the bottom now displays the setting

you just made.

► The WLAN module of the repeater thus always switches on at 8:00 AM and off at

8:00 PM on Mondays, Tuesdays and Thursdays.

To save the settings, click Apply. All settings will otherwise be lost. The next window conﬁrms that

the settings have been saved.

Note

► Note that you must restart the repeater at least once in order for altered settings to

be applied.

You can now restart the repeater or make further settings.

• If you wish to restart the repeater, click Apply.

• To make additional settings, click Continue.

00062728man.indd 22 09.02.15 08:28