Operating instructions

WLAN 300 Mbps RepeaterWLAN 300 Mbps Repeater

• To change the password, enter the current password in the Current password box. If you have left

the default settings unchanged, the current password is hama.

• Enter the new password twice, in both the New password box and Re-enter password box, ensu-

ring that the entries are identical. Then click Apply.

• Save the settings, click Apply. All settings will otherwise be lost. The next window conﬁrms that

the settings have been saved.

Note

► Note that you must restart the repeater at least once in order for altered settings to

be applied.

You can now restart the repeater or make further settings.

• If you wish to restart the repeater, click Apply.

• To make additional settings, click Continue.

7.2.5 LED settings function:

The LED settings option allows you to completely deactivate the indicators on the repeater or to

leave only the power LED activated.

• Activate the LED settings by placing a check in the Enable LED settings checkbox and then selec-

ting your desired option.

• To save the settings, click Apply. All settings will otherwise be lost. The next window conﬁrms that