Operating instructions

12
WLAN 300 Mbps Repeater
In the next step, you will specify the time zone and the time server that your repeater will use. With
this option, your repeater is supplied with the exact time by a selected time server; it is important
for the WLAN timer option.
You can change the time zone for your current location using the Time zone drop-down menu. It
is set to GMT + 00.00 Greenwich Mean Time by default. If you are using the device in Germany,
for example, you should set the time zone to GMT + 01:00 Amsterdam, Berlin.
In the Time server address input screen, you can specify an NTP (Network Time Protocol) server
by entering either the IP address or the domain name.
Note – NTP
► Since Hama GmbH & Co KG does not operate its own NTP server, you must first do
some research on the Internet to determine which servers are offered free to the
public.
Finally, click Restart to save the settings and restart the device. The repeater will restart and will
need about 2-3 minutes before it is ready for operation again.
00062728man.indd 12 09.02.15 08:28