Operation Manual
48
49
If you want to restart the router with the current settings, select Current Settings and click RESTART.
If you want to reset the factory default settings, select Factory Default Settings and click RESTART.
9.5 Diagnostics: (Router diagnostics)
In the Main Menu, select the
Maintenance menu item,
and then the Diagnostics
sub-item.
You can run a diagnostics
test for the WLAN ADSL2+
Modem Router here.
Virtual Circuit: If you are retaining the default settings, you must select PVCO in this fi eld.
PASS = Passed the test
FAIL = Error or incorrect configuration
SKIPPED = Test was skipped
10 Status:
This overview provides detailed information about your current router settings. In the Main Menu, select the
Status menu item.
10.1 Device info:
This window provides an
overview of the current
operating status of your
ADSL2+ Modem Router.
If you contact or call Hama
Product Consulting, please
have a printout or screen
shot of the status overview
to hand.
10.2 System Log:
In the Main Menu, select the Status menu item, and then the System Log sub-item.
You can check the detailed error messages for the router in this view. If you contact or call Hama Product
Consulting, please have a printout of the system log to hand.
CLEAR LOG: Delete system log.
SAVE LOG: Save the system log in a fi le.
11 Help:
In the Main Menu, select the Help menu item.
This view provides an overview of the router in addition to detailed explanations of the different functions.
This is not yet available in English.