Operation Manual
32
3.1.4 PPPoE user data
You must enter the access data for your provider in the
next window. Refer to the documents from your Internet
provider for this information.
Username:
Refer to the documents from your Internet provider for this
name, which is specifi c to the provider.
In addition to the access data, enter the following:
Password:
Refer to the documents from your Internet provider for the provider-specifi c password.
VPI and VCI:
Consult your internet provider for these values. When this manual was printed, the following values were
applicable for DSL connections with Deutsche Telekom and similar companies:
VPI: 1
VCI: 32.
As indicated, the values can vary according to the country or provider.
Connection type (Broadband connection type):
For the PPPoE connection type, select the PPPoE LLC option.
Then click NEXT. In the next window you will be notified that the configuration has been successful. Save your
entries by clicking NEXT.
Configuring your internet connection using the Wizard (Quick Start) is then complete.
Click CLOSE to save your settings.
You must then restart the router for the settings to take effect. To do so, call the Maintenance menu, select the
SysRestart sub-item and then choose System Restart with: Current Settings. Then click RESTART.