Operation Manual

Checking installation:

There are different LEDs for indicating the status on the top of the device:

LEDCondition Status

POWER IlluminatedPower supply unit is connected and supplying power

OffNo power unit connected, device not being supplied with power

WLAN device Flashing Wireless LAN is activated / data is being sent

OffWireless LAN is deactivated

SYNC IlluminatedModem has successfully synchronised with the switching centre

Flashing Modem is attempting to synchronise with the switching centre

LAN 1-4IlluminatedThe corresponding LAN porthas established a correct network connection

Flashing Data transfer via respective LAN port

OffNo connection

2. Conﬁguring the Operating System and Computer

The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the IP address

192.168.2.1 and an activated DHCP server are conﬁgured for the router. This means that the connected PCs are

automatically allocated suitable addresses and other settings. We recommend that you keep these settings.

Proceed as follows to check the settings on your PC:

On your Windows Desktop click

Start -> Settings -> Control Panel -> Network

Connections

or, with Windows Vista,

Start (Windows logo) -> Control Panel -> Network and

Internet -> Network Connections

Select the connection type (network adapter) between

your PC and the router, e.g. “LAN connection”. When

you right-click the corresponding connection, a menu is

displayed; select Properties.

Select the Internet Protocol (TCP/IP) entry in the list

and then click Properties.