Operation Manual
44
Port: Enter the number of the portto which the rule is to apply. If you enter 0, this setting is ignored.
Protocol: Enter the IP protocol in this fi eld; choose between TCP, UDP or ICMP.
Click SAVE at the bottom of the window to save your settings.
8.3 SNMP:
In the Main Menu, select the
Access Management menu
item, and then the SNMP
sub-item.
The Simple Network
Management Protocol is a
network protocol that was
developed for monitoring and
controlling network elements
(routers, servers, switches, printers, computers etc.) from a central station.
Get Community: Enter the user name or public (visible to all).
Set Community: Enter the user name or public (visible to all).
Click SAVE at the bottom of the window to save your settings.
8.4 UPnP (Universal Plug and Play setting):
In the Main Menu, select the
Access Management menu
item, and then the UPnP
sub-item.
Universal Plug and Play
(UPnP) allows you to control
devices made by any
manufacturer
(media centres, routers,
printers), using an IP-based
network, with or without
central control. It is based on a series of standardised network protocols and data formats.