Operation Manual
42
8.1 ACL: (Access control for certain services)
In the Main Menu, select the
Access Management menu
item, and then the ACL sub-
item.
The Access Control List (ACL)
allows you to specify exactly
which computers are allowed
to access which service.
ACL: Activated means that the ACL is switched on.
Deactivated means that the ACL is switched off.
ACL Rule Index: You can choose from 1 to 16, which means that you can configure up to 16 different ACLs.
Active: Yes means that Rule 1, for example, is switched on.
No means that Rule 1, for example, is switched off. You can also switch individual rules on or
off if required.
Secure IP Address: In this fi eld, enter the computer’s IP address if you want the rule to be valid for this computer
exclusively. If you want the rule to be valid for all computers connected to the router, enter
0.0.0.0.
Application: Enter the protocol/application to which the rule should apply. You can choose from the
following options: Web, FTP, Telnet, SNMP, Ping or ALL.
Interface: Select the exchange point for which the rule is valid. You can choose from the following
options: WAN, LAN and Both.
Click SAVE at the bottom of the window to save your settings.