Operation Manual

37
6.1 ATM VC: (DSL modem setting)
Asynchronous Transfer
Mode (ATM) is a method of
transferring data whereby
the data traffi c is transferred
in small packets, and the
transfer is coded and
asynchronous. You must enter
the following values, which
differ according to the DSL connection.
Virtual Circuit: PVCO is selected by default.
Status: Activated must be selected.
VPI: 1
VCI: 32
Note: The values 1 and 32 are only valid for the Deutsche Telekom DSL connection. If your connection is through a
different company or you are not resident in Germany, ask your DSL connection provider for these values.
Click SAVE at the bottom of the window to save your settings.
6.2 Encapsulation: (DSL protocol)
The purpose of encapsulation
is to encapsulate other
protocols and to transport
these in the form of IP
tunnels.
Click SAVE at the bottom of the window to save your settings.
6.3 PPPoE/PPPoA: (Broadband connection protocol)
PPP over Ethernet (PPPoE)
is the use of the Point-to-
Point Protocol (PPP) with an
Ethernet connection.