Manual

6
• Press and hold the Power/Release button (2) for about 3 seconds to switch on the
Bluetooth remote release. The LED indicator light (1) will begin to flash.
• This means the Bluetooth remote release is searching for a Bluetooth connection.
• Open the Bluetooth settings on your terminal device and wait until Hama BRS3
appears in the list of Bluetooth devices found.
• Select Hama BRS3 and wait until the Bluetooth remote release is listed as connected
in the Bluetooth settings on your terminal device. The LED indicator light (1) goes
out.
• You can now use the Bluetooth remote release.
6.2. Automatic Bluetooth connection (after successful pairing) (A)
Note
• Make sure that your Bluetooth-capable terminal device is on and Bluetooth is
activated.
• Make sure that your Bluetooth-capable terminal device is visible for other
Bluetooth devices.
• For more information, please refer to the operating instructions of your terminal
device.
• The Bluetooth remote release remains connected to the Bluetooth device it was
last paired with.
• Press and hold the Power/Release button (2) for about 3 seconds to switch
on the Bluetooth remote release. The LED indicator light (1) will begin to flash.
• You can now use the Bluetooth remote release.
To switch off, press the Power / Trigger button (2) for approx. 5 seconds.
The LED pilot light (1) goes out.