Operation Manual

II. Connect the A end of the USB cable to the USB socket on your desktop or laptop PC.

2. Connect the external passive DVB-T antenna.

I. Make sure that the cable is connected to the antenna.

II. Connect the antenna to the correct socket on the case of the DVB-T USB 2.0 receiver.

Note: If you are installing the DVB-T USB 2.0 receiver on a laptop, ensure that the power saving function is

deactivated, as it reduces CPU performance and can prevent the DVB-T USB 2.0 receiver from functioning properly.

16. Close all applications and store your work before clicking Finish.

2.3 Hardware installation

Installing the DTB-T USB 2.0 receiver hardware.

1. Connect the USB cable.

I. Connect the B end of the USB cable to the USB socket on the case of the DVB-T USB 2.0 receiver.

00020890bda3 21.04.2005 14:41 Uhr Seite 12