Operation Manual

3.2 Setting the recording process
Two methods are available for recording: Recording in real time or according to the time schedule.
I. Recording in real time: When recording the program in real time mode, the recorded file is stored in the
default target folder under C:\Programs\DTV\DVB-T USB 2.0\Capture\Video.mpg. To store this program file
at another location, you can create the path as desired.
Once you have carried out the above setting, click on the control panel, if you would like to view the digital
programs. When the recording starts, the clock is displayed in red on the left side of the control panel. To stop the
recording, click.
2. Select the RF frequency. You can select one of the following options:
23
22
(1) Land/Region: Select your location.
(2) All: If you do not find your location on the Land/Region list, select this
option.
(3) Area: You can determine your own frequency range. Select VHF or UHF
and then enter its frequency range.
(4) Single: If you know the exact frequency of a digital program, you can
enter its frequency here.
3. Click Start to scan the frequency according to the selected RR frequency option.
4. Click Save As to store all of the scanned channels.
5. Click OK to exit the control panel.
Note: The channel list is stored as a TBL file.
00020890bda3 21.04.2005 14:41 Uhr Seite 22