User manual

4
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device’s battery is fully charged. The status LED
(2) changes its colour.
• Remove your terminal device from the induction charger and disconnect the station from
the power supply.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: [phone] (German/English)
Further support information can be found here:
www.hama.com
8. Technical Data
Inductive Charger
Input 5V 2000mA
Output 5V 1000mA
Dimensions 65 x 115 x 18 mm