User manual

4
4. Getting Started and Operation
Note
• For charging a terminal device with the inductive charger,
your terminal device has to be compatible with the induction
charging technology. Please read the operating instructions
of your device.
• Please note that mobile phone sleeves, covers, etc. and other
materials between the inductive charger and the backside of
your terminal device disturb or prevent actually the charging
process.
• Connect the included connection cable to the socket (1) on the
inductive charger and the included power supply unit.
• Switch on the inductive charger by plugging the power supply unit
into a power outlet approved for this purpose.
• When the power supply is active, the status LEDs (2) light up.
Warning
• Only use suitable charging devices or USB connections for
charging.
• As a rule, do not use charging devices or USB connections that
are defective and do not try to repair them yourself.
• Put your terminal device(s) on the inductive charger (B) with the
back to the charger.
• Charging starts as soon as an effective induction eld has been
generated. The system emits an acoustic signal. The relevant
status LED (2) starts to ash. The current charging status
appears on your terminal device.
• If no connection can be established through induction, you may
have to change the position of your terminal device (B).