Manual

3
Warning
Only operate the product from a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
Disconnect the product from the power supply
using the On/Off switch if this is not available,
unplug the power cord from the socket.
If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
If you will not be using the product for a
prolonged period, disconnect it from mains
power.
Unless different instructions have been expressly
given in the operating instructions for the devices
you are charging, proceed as follows:
Without connecting it to the socket, determine the
mechanical compatibility between the universal
power supply unit's adapter and the connection
socket on the device.
Observe the polarity of the connection socket on
the device and plus the adapter in accordingly
(see Fig. 2).
Set the voltage selector switch to the voltage
required by your device using the adjusting key
supplied
Plug the universal power supply unit into the
socket provided for it.
The terminal device can now be used and
switched on.
5. Care and maintenance
Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
6. Technical data
Information according to Directive
(EU) 2019/1782
Brand name,
commercial register
number, address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identier 00223616
Input voltage 100 V - 240 V
Input AC
frequency
50/60 Hz
Output voltage /
output current /
output power total
9.0 V DC/ 1.5 A/ 13.5 W
12.0V DC/ 1.5 A/ 18.0 W
13.5V DC/ 1.5 A/ 20.2 W
15.0V DC/ 1.5 A/ 22.5 W
18.0V DC/ 1.2 A/ 21.6 W
20.0V DC/ 1.2 A/ 24.0 W
24.0V DC/ 1.0 A/ 24.0 W
Average eciency
during operation
83.6 %
Eciency at low load
(10%)
79.2 %
Power consumption at
zero load
0.1 W
7. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.