Manual

3
Warning
•Disconnect the product from the power supply
using the On/Off switch –ifthis is not available,
unplug the power cordfromthe socket.
•Ifusing amulti-socket power strip, make
surethat the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
•Ifyou will not be using the product for a
prolonged period, disconnect it from mains
power.
Unless different instructions have been expressly
given in the operating instructions for the devices
you arecharging, proceed as follows:
•Without connecting it to the socket, determine the
mechanical compatibility between the universal
power supply unit's adapter and the connection
socket on the device.
•Observe the polarity of the connection socket on
the device and plus the adapter in accordingly
(see Fig. 2).
•Set the voltage selector switch to the voltage
required by your device using the adjusting key
supplied
•Plug the universal power supply unit into the
socket provided for it.
•The terminal device can now be used and
switched on.
5. Care and maintenance
•Only use soft, dry towels to clean the product.
Note
Disconnect the device from the mains before
cleaning and during prolonged periods of
non-use.
6. Technical data
Information according to Directive
(EU) 2019/1782
Brand name,
commercial register
number,address
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identier 00223614
Input voltage 100 V-240 V
Input AC
frequency
50/60 Hz
Output voltage /
output current /
output power total
3.0W 3.0V DC 1.0A
4.5W 4.5V DC 1.0A
5.0W 5.0V DC 1.0A
6.0W 6.0V DC 1.0A
9.0W 9.0V DC 1.0A
12.0W 12.0V DC 1.0A
Average eciency
during operation
75.1 %
Eciency at low load
(10%)
66.6 %
Power consumption at
zeroload
0.07 W
7. Warranty disclaimer
Hama GmbH &CoKG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failuretoobserve the operating
instructions and/or safety notes.