Manual

6
G Operating Instructions
Thank you for choosing aHama product.
Take your time and read the following instructions
and information completely.Please keep these
instructions in asafe place for futurereference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specichazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• 1x “Magnetic Alu” Universal Smartphone Holder
• 2x metal plates (round, rectangular)
• these operating instructions
3. Safety instructions
• Use the product only for the intended purpose.
• Protect the product from dirt, moistureand
overheating and use it in dry environments only.
• When using this product, observe the applicable
local traclaws and regulations.
• Do not drop the product and do not expose it to
any major shocks.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way.Doing so
voids the warranty.
Warning -magnets
• People with pacemakers should keep away
from the magnets. The magnets can negatively
affect the function of the pacemaker.
• Do not place any bank or similar cards with
magnetic strips or magnetically sensitive
objects on the product. The data on the cards
could be damaged or completely deleted.
Warning
• Take carethat components such as airbags,
safety areas, controls, instruments, etc. and
visibility arenot blocked or restricted.
• While driving acar or using sports equipment,
do not allow yourself to be distracted by
your product and keep an eye on the trac
situation and your surroundings.
4. Installation
Note
• Beforeinstalling the holder,check the
installation options in your vehicle. If in doubt,
check the vehicle's instruction manual or
contact the vehicle manufacturer.
• Check the load-bearing capacity of the slats
beforeinserting adevice into the holder.This
installation version is only recommended for
devices <300 g.
• Never apply force when using the product or
during installation.
• Slide the grating clamp (A)carefully onto the open
slats of the grating.
• To remove it, carefully pull the holder out of
the grating.
• Remove the protective lm (B)fromthe adhesive
side of the metal plate (round or rectangular) and
press it onto the desired adhesive surface (e.g. rear
of mobile phone) for afew seconds.
• The metal plate (C)can simply be inserted/stuck
between the protective cover and the rear of the
mobile phone.
5. Care and maintenance
Only clean this product using alint-free, slightly damp
cloth and do not use any harsh cleaners.
6. Warranty disclaimer
Hama GmbH &CoKG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the pro