Instructions

(For allsmartphones that do not featureMagSafe technology)

•The charging process ends automatically once your device's battery is fully charged. The status

LED (2) goes out.

•Remove your device from the Power Pack's induction charging zone and switch it off by pressing

and holding the Power button for around 10 seconds.

Note

The Power Pack can be charged and the inductive charging function used simultaneously.

4.2.2. Charging via the Power Pack's USB-C output:

•Connect the enclosed USB-C charging cable to the USB-C port on the Power Pack

(OUT 5V/2.4A)and to the USB-C port on your device (mobile phone, smartphone, etc.).

•Incertain circumstances, the enclosed charging /connecting cable may not match the USB port on

your device. In this case, use the USB cable that came with your device.

•The charging process begins automatically.During the charging process, the status LEDs indicate

the power pack's remaining available capacity.

•The current battery charge status of your device is indicated on this.

•Terminate the charging process and switch the Power Pack off by pressing and holding the Power

button for around 10 seconds. The status LEDs go out.

•Inthe event that no device is connected, the power pack switches itself off automatically.

Warning –Connection of devices

•Beforeconnecting adevice, check whether it can be adequately supplied with the power pack's

current delivery.

•Ensurethat the total current consumption of the connected device does not exceed 2400 mA.

•Note the instructions in your device's operating manual.

•You must obey the instructions and safety notes contained therein regarding the supply of

power to your devices.

Note –optimised charging

Optimised charging means that the power pack recognises the connected device, supplies it with

the ideal current strength and thereforereduces the charging time to aminimum. Note that the

Power Pack's maximum current delivery is 2400 mA.

5. Care and maintenance

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning

agents.

6. Warranty disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from

improper installation/mounting, improper use of the product or from failuretoobserve the operating

instructions and/or safety notes.