Instruction Manual
4
Removal
1. Pull the built-in light out of the installation opening on
one side. Take care to ensure that the clamp does not
accidentally slip out of the opening. Otherwise there is a
danger that ngers may become trapped.
2.
First carefully remove one clamp, then the other, from
the installation opening.
3. The further removal process is carried out in the reverse
order to the installation process.
5. Integrating devices into the Hama Smart Home
(Solution) APP
The LED built-in spotlight starts to ash quickly (if it does
not, switch the LED built-in spotlight ON and OFF again
quickly three times in a row).
• Open the app and sign in.
• Press the + in the top right-hand corner to add a new
device.
My Home
• Choose Lights from the list.
• Next enter your WiFi password and conrm with NEXT.
• Now conrm that the light is ashing quickly by ticking
"Next step" and clicking on "Next".
• The LED built-in spotlight is now connected.
Connecting Now
• Once the connection is successful, the product stops
ashing quickly and the app conrms that your product
is connected. You can now assign it a different name if
you wish.
Added successfully
Done
• Click Finish to end the process.
• You can now congure and control the prod-
uct.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com
ð
Article Number
ð
Downloads
ð
App Operating Instructions