Instruction Manual

2
G Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of symbols used on the product label
Electrical device of safety class II.
Protection against electric shock thanks to
reinforced or double insulation of live parts.
The product is intended only for use inside
buildings.
Only use in a dry environment.
No heat-insulating materials must be in
contact with the light.
The product must only be used with alter-
nating current.
Non-dimmable.
The lamp is not suitable for use with a
conventional dimmer.
The article may only be connected by a
qualied electrician who complies with
national regulations and those of the local
energy supply company, and who has
sucient knowledge regarding installation
locations, re protection and electrical
installation work.
2. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specic hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
3. Package contents
Package contents for 176578, 176588, 176608,
176610:
• 1 WiFi built-in spotlight
• 1 quick-start guide
Package contents for 176579, 176589, 176609,
176611:
• 3 WiFi built-in spotlight
• 1 quick-start guide
4. Safety instructions
• This product is intended for private, non-commercial use
only.
• This product is intended exclusively for installation
in suspended ceilings or suitable built-in recesses or
concrete built-in housings.
• Use the product only for the intended purpose.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
specied in the technical data.
• Do not modify the product in any way. Doing so voids
the warranty.
• Children must not play with the device. Cleaning and
user maintenance must not be carried out by children
without supervision.
• As with all electrical products, this device should be kept
out of the reach of children.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• The product should only be installed in self-contained
rooms. It is not suitable for installation in bathrooms.
• The product must only be operated on a supply network
as described on the type plate.
• Before mounting, check that the ceiling you have chosen
is suitable for the weight to be mounted. Also make
sure that there are no electric, water, gas or other lines
running through the ceiling at the mounting site.
• Electrical cables must never become trapped or twisted
between the product and the surface.
• If the product is attached to a metal surface, it must be
connected to an earth lead or the installation's potential
equalising cable.
• These built-in lights are not compatible with dimmer
switches, motion sensors or dimmers.