Instruction Manual

3
5. Commissioning
Charging the battery
Warning – Battery
• Only use suitable charging devices or USB
connections for charging.
• As a rule, do not charge devices or USB connections
that are defective and do not try to repair them
yourself.
• Do not overcharge the product or allow the battery
to completely discharge.
• Avoid storing, charging or using the device
in extreme temperatures and extremely low
atmospheric pressure (for example, at high
altitudes).
• When stored over a long period of time, batteries
should be charged regularly (at least every three
months).
• The product contains a rechargeable battery.
• Charge the keyboard fully before using it for the rst
time.
• If the Power LED (2) is ashing red or if there is
no response / connection after switching it on, the
keyboard needs to be charged.
• Connect the supplied USB charging cable to the USB
charging connection (7) on the keyboard.
• Connect the free plug on the USB charging cable to a
suitable USB charger. To do this, consult the operating
instructions for the USB charger you are using.
• The status LED (4) now lights up solid red and the
keyboard is charging.
• Once the charging process is complete, the red status
LED goes out.
The actual battery life varies according to the use of
the device, the settings and the ambient conditions
(rechargeable batteries have a limited service life).
Note – charging procedure
• A complete charging cycle takes about 4 hours.
• The keyboard's rechargeable battery can be
charged both when it is switched on and off.
• Use the USB charging cable included for this
product.
6. Operation
Note
• The functions described in this section are only
possible with Bluetooth
®
-enabled devices.
• Note that the maximum range for Bluetooth
®
is 10
metres without obstacles such as walls, people, etc.
6.1 Bluetooth
®
initial connection (pairing)
Note - pairing
• Ensure that the Bluetooth
®
-enabled device is
switched on and that the Bluetooth
®
function is
activated.
• Make sure that your Bluetooth
®
-enabled device is
visible to other Bluetooth
®
devices.
• Please refer to the operating instructions of your
device for more information.
• Slide the [OFF/ON] switch (6) to the ON position to
switch on the Bluetooth® keyboard. The power LED
(2) lights up blue for approx. 2-5 seconds.
• Now press and hold the key combination fn+C
simultaneously for approx. 2-5 seconds to start the
pairing process.
• The Bluetooth status LED (5) lights up blue as soon
as the Bluetooth keyboard is successfully connected
to the device.
• The keyboard is searching for a Bluetooth
®
connection.
• Open the Bluetooth
®
settings and wait until the list of
found Bluetooth
®
devices shows Hama BT keyboard.
• Select Hama BT keyboard, follow the instructions
of your end device if necessary and wait until the
keyboard is displayed as connected in the Bluetooth
®
settings of your device.
• You can now use the Bluetooth
®
keyboard.
Note - Bluetooth
®
pairing
• If the device is disconnected from the Bluetooth
keyboard or the device is switched off, the keyboard
automatically switches to sleep mode after 10
minutes.
• Pressing any button automatically re-establishes the
Bluetooth connection.