Owner manual

User Manual – Haltech 350Z
10. KEYBOARD REFERENCE
PgUp Increase Cell Value
PgDn Decrease Cell Value
Ctrl + PgUp Small Increase of Cell Value
Ctrl + PgDn Small Decrease of Cell Value
Shift + PgUp Large Increase of Cell Value
Shift + PgDn Large Decrease of Cell Value
0 - 9 Set the Tuning Table cell value
Arrow Moves the selected cell/s pointer
Shift + Arrow
Increases the number of selected
cells
Ctrl + Arrow
Decreases the number of
selected cells
Alt + Arrow Change the selected map
Tab Selects the next Tuning Page
Shift + Tab Selects the previous Tuning Page
Space
Aligns the cursor to current
engine operating point
Ctrl + Space
Shrinks the selection to a single
cell
F1 Open Help Window
F3 Axes Setup
F4 Main Setup
F5 Connect / Disconnect from ECU
Ctrl - A
Select all the cells in the current
Tuning Table
Ctrl - C Copy
Ctrl - V Paste
L
Linearize across the selected
cells
P
Percentage increase or decrease
the selected cells
Q
Will alter the current Base Fuel
table value to attempt to make the
actual AFR meet the Target AFR.
(Wideband sensor required)
1.0 Page 39 of 42