Owner manual

User Manual – Haltech 350Z
Figure 12: The text view table with all cells selected
Ctrl-A — Will select all cells in the tuning table.
When multiple cells are selected, cell operations will be applied to all cells.
7.1.2 Deselecting cells
Deselecting cells can be done by holding down the Ctrl key, then any arrow key.
For example, pressing Ctrl-RightArrow will reduce the selected area by one column, by deselecting the far left
column.
Ctrl SPACE— Will deselect all cells in the tuning table.
7.1.3 All Ranges mode
All ranges mode allows the user to expand their current cell selection across all rows.
This can be useful when editing a table for the first time or when an adjustment across rows needs to be made.
To enable All ranges use the R key
To disable All ranges use the R key again
Figure 13: The text view table with one cell selected Figure 14: The text view table with All ranges enabled
7.1.3.1 All Ranges above mode
1.0 Page 21 of 42