Manual

21
If this message appears check all connections and ensure that the communications cable is not
being interfered with. Also be sure that the Haltech IG5 unit is receiving power. (i.e. ignition
switch is turned "on".)
2.5 The Main Menu
When you select Online or Offline mode the Haltech MAIN MENU bar appears. This menu
bar allows access to sub-menus giving access to maps, file storage/retrieval, engine data and
options.
2.6 How to Quit
Throughout the program you can exit from any application by using the menu bars or hot
keys. Pressing
♣θ
♣θ♣θ
♣θ
in any page will prompt you to exit the program (i.e. pressing
θ
θθ
θ
while
holding down the
♣
♣♣
♣
key). If you wish to exit press
Ψ
ΨΨ
Ψ
when prompted.
2.7 Checking the Engine Data
The engine data option can only be used when the system is Online. This function allows all
of the engine data variables to be displayed on the screen
This is a very useful function for analysing the engine sensors. To display the engine data
press
♣ε
♣ε♣ε
♣ε
from any application. Alternatively it can be accessed through the menu bar by
pressing
ƒΟ
ƒΟƒΟ
ƒΟ
and then
Ε
ΕΕ
Ε
for Engine Data.
Do not attempt start the engine if the Engine Identification has not been set up. View the
engine data page to ensure all the sensors are operating properly.