PLATINUM Sport 2000 Haltech GM LS1 / LS6 Terminated Engine Harness (HT045650) QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com HALTECH US OFFICE: EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
Fuse Box The Haltech fuse box is connected to the harness. Contained within the Haltech Fuse box is 6 fuses and 6 relays, each fuse protects the corresponding relay output ( ie fuse #1 protects relay ouput #1, fuse #2 protects relay output #2 etc). PLATINUM Sport 2000 Haltech GM LS1 / LS6 Terminated Engine Harness Quick Start Guide Congratulations on purchasing a Haltech Engine Management Terminated Engine Harness. This Plug and Play product allows you to be up and running in a few hours.
Harness Overview Wideband 02 Inputs (02-1 , 02-2) The Haltech GM LS1 / LS6 Terminated Engine Harness is a plug and play solution for wiring a General Motors LS1 or LS6 Engine. Wideband 02 sensors accurately measure the Air/Fuel ratio of the Engine which is required for precise tuning and control of the engine. Used in conjunction with the Haltech Dual Wideband kit (HT010704) the Wideband 02 inputs allows for quick and easy installation of the sensors and controller.
Starter Signal (STS) Termination Descriptions The Starter Signal connects directly to the starter motor solenoid. This will supply 12V to the solenoid on receiving a start signal from the ignition switch when in the start position. Analogue Voltage Inputs (AVI-5, Fuel-P, Oil-P) Please ensure you supply a main power connection to the starter motor and a main earth strap to the engine to ensure correct operation of the starter motor, and to avoid damage to your terminated harness and ECU.
Alternator (ALT) Ignition 1-8 (IGN1, IGN2, IGN3, IGN4, IGN5, IGN6, IGN7, IGN8) The Alternator output connects directly to the OEM Alternator. The +12V signal and alternator excite wires are pre-wired into the loom The ignition outputs connect directly to the ignition coils. Please ensure the correct ignition output is connected to the corresponding coil on the engine. Please refer to the label on the harness for correct cylinder coil allocation.
Alternator (ALT) Ignition 1-8 (IGN1, IGN2, IGN3, IGN4, IGN5, IGN6, IGN7, IGN8) The Alternator output connects directly to the OEM Alternator. The +12V signal and alternator excite wires are pre-wired into the loom The ignition outputs connect directly to the ignition coils. Please ensure the correct ignition output is connected to the corresponding coil on the engine. Please refer to the label on the harness for correct cylinder coil allocation.
Starter Signal (STS) Termination Descriptions The Starter Signal connects directly to the starter motor solenoid. This will supply 12V to the solenoid on receiving a start signal from the ignition switch when in the start position. Analogue Voltage Inputs (AVI-5, Fuel-P, Oil-P) Please ensure you supply a main power connection to the starter motor and a main earth strap to the engine to ensure correct operation of the starter motor, and to avoid damage to your terminated harness and ECU.
Harness Overview Wideband 02 Inputs (02-1 , 02-2) The Haltech GM LS1 / LS6 Terminated Engine Harness is a plug and play solution for wiring a General Motors LS1 or LS6 Engine. Wideband 02 sensors accurately measure the Air/Fuel ratio of the Engine which is required for precise tuning and control of the engine. Used in conjunction with the Haltech Dual Wideband kit (HT010704) the Wideband 02 inputs allows for quick and easy installation of the sensors and controller.
Fuse Box The Haltech fuse box is connected to the harness. Contained within the Haltech Fuse box is 6 fuses and 6 relays, each fuse protects the corresponding relay output ( ie fuse #1 protects relay ouput #1, fuse #2 protects relay output #2 etc). PLATINUM Sport 2000 Haltech GM LS1 / LS6 Terminated Engine Harness Quick Start Guide Congratulations on purchasing a Haltech Engine Management Terminated Engine Harness. This Plug and Play product allows you to be up and running in a few hours.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
PLATINUM Sport 2000 Haltech GM LS1 / LS6 Terminated Engine Harness (HT045650) QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com HALTECH US OFFICE: EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
