PLATINUM Sport 2000 Nissan RB30 Series Terminated Engine Harness #HT045505 QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com.au HALTECH US OFFICE: PH: 760 598 1941 FAX: 760 598 1987 EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
Notes PLATINUM Sport 2000 Nissan RB30 Series Terminated Engine Harness Quick Start Guide Congratulations on purchasing a Haltech Engine Management Terminated Engine Harness. This Plug and Play product allows you to be up and running in a few hours. The Harness when installed in conjunction with a Haltech Platinum Sport 2000 opens the door to virtually limitless performance modification and tuning of your vehicle.
Harness Overview The Haltech Nissan RB30 Series Terminated Engine Harness is a plug and play solution for wiring a Nissan RB30 Series Engine. Installation is simple and easy as the harness is designed for the engine, all lengths are correct and all wires are clearly labeled. Notes on installation: • Make sure your Engine is grounded directly to the chassis of the vehicle. A heavy gauge ground / earthing strap should be used to ground your engine to the chassis of the vehicle.
Harness Pinout Termination Descriptions The Haltech RB30 terminated harness utilizes the following terminated connections Engine Coolant Temperature Sensor (ECT) The Engine Coolant Temperature Sensor provides the ECU with a signal that allows the ECU to know the current engine temperature. A Haltech Coolant temperature sensor (HT010300) is required to be fitted in the OEM location for correct operation and connection.
Oil Pressure Sensor (Oil-P) The Oil-P labeled connector connects directly a Haltech oil pressure sensor. This will enable the user to know the current oil pressure of the vehicle. An optional oil pressure sensor must be fitted. Haltech Part # HT010904 Oil Pressure is allocated to Analogue Voltage Input 4 (AVI4) on the Haltech Sport ECU. OEM Oil Pressure Sensor (Oil-P Switch, Oil-P Gauge) Provisions have been made in the harness to accommodate the OEM cluster oil pressure switch and oil pressure gauge.
In Cabin Wiring Auxiliary Air Control Valve (AAC) The In cabin wiring is made up of multiple inputs and outputs. Correct connection of these wires is essential for proper operation of the harness. All wires have been labeled and required cables should be connected as outlined below. The Auxiliary Air Control Valve (AAC) is used to control the Idle speed of the engine. Connect the AAC labeled wires to the AAC valve.
Ignition Ground (GND) The Ignition wiring within the Haltech RB30 series terminated harness has been wired to allow the user to keep the standard distributor ignition setup or upgrade to direct fire ignition. The Ground cable connects directly to the engine intake manifold or head. Warning this in NOT the earth cable for the engine, please ensure that you earth the engine with an earth strap from the block of the engine to the chassis of the car.
Ignition Ground (GND) The Ignition wiring within the Haltech RB30 series terminated harness has been wired to allow the user to keep the standard distributor ignition setup or upgrade to direct fire ignition. The Ground cable connects directly to the engine intake manifold or head. Warning this in NOT the earth cable for the engine, please ensure that you earth the engine with an earth strap from the block of the engine to the chassis of the car.
In Cabin Wiring Auxiliary Air Control Valve (AAC) The In cabin wiring is made up of multiple inputs and outputs. Correct connection of these wires is essential for proper operation of the harness. All wires have been labeled and required cables should be connected as outlined below. The Auxiliary Air Control Valve (AAC) is used to control the Idle speed of the engine. Connect the AAC labeled wires to the AAC valve.
Oil Pressure Sensor (Oil-P) The Oil-P labeled connector connects directly a Haltech oil pressure sensor. This will enable the user to know the current oil pressure of the vehicle. An optional oil pressure sensor must be fitted. Haltech Part # HT010904 Oil Pressure is allocated to Analogue Voltage Input 4 (AVI4) on the Haltech Sport ECU. OEM Oil Pressure Sensor (Oil-P Switch, Oil-P Gauge) Provisions have been made in the harness to accommodate the OEM cluster oil pressure switch and oil pressure gauge.
Harness Pinout Termination Descriptions The Haltech RB30 terminated harness utilizes the following terminated connections Engine Coolant Temperature Sensor (ECT) The Engine Coolant Temperature Sensor provides the ECU with a signal that allows the ECU to know the current engine temperature. A Haltech Coolant temperature sensor (HT010300) is required to be fitted in the OEM location for correct operation and connection.
Harness Overview The Haltech Nissan RB30 Series Terminated Engine Harness is a plug and play solution for wiring a Nissan RB30 Series Engine. Installation is simple and easy as the harness is designed for the engine, all lengths are correct and all wires are clearly labeled. Notes on installation: • Make sure your Engine is grounded directly to the chassis of the vehicle. A heavy gauge ground / earthing strap should be used to ground your engine to the chassis of the vehicle.
Notes PLATINUM Sport 2000 Nissan RB30 Series Terminated Engine Harness Quick Start Guide Congratulations on purchasing a Haltech Engine Management Terminated Engine Harness. This Plug and Play product allows you to be up and running in a few hours. The Harness when installed in conjunction with a Haltech Platinum Sport 2000 opens the door to virtually limitless performance modification and tuning of your vehicle.
LIMITED WARRANTY Lockin Pty Ltd trading as Haltech warrants the Haltech TM Programmable Fuel Injection System to be free from defects in material or workmanship for a period of 12 months from the date of purchase. Proof of purchase, in the form of a bill of sale or receipted invoice, which indicates that the product is within the warranty period, must be presented to obtain warranty service.
PLATINUM Sport 2000 Nissan RB30 Series Terminated Engine Harness #HT045505 QUICK START GUIDE HALTECH HEAD OFFICE: PH: +612 9729 0999 FAX: +612 9729 0900 EMAIL: sales@haltech.com.au HALTECH US OFFICE: PH: 760 598 1941 FAX: 760 598 1987 EMAIL: usa@haltech.com See the Haltech Website for your local authorized dealer. www.haltech.
