User Manual

E6X Manual
31
3.1.3 The Set-up Menu
The set-up menu allows access to the ECU set-up pages (which contain most of the
information about the engine that the ECU is to control) and the program set-up page.
The set-up menu contains:
- Main Set-up CTRL-M
- Fuel Set-up
- Ignition Set-up
- Trigger Setup
- In/Out Set-up
- Throttle Setup
- ComPort Setup
- Screen Colour
- Set Password
3.1.4 The Options Menu
The options menu allows access to the option pages. The options set-up pages allow the user
to modify the setting for idle control, closed loop O2 Control and the 4 PWM channels and
any available digital outputs.
The options menu contains:
- Idle Speed Control
- Closed Loop O
2
control
- PWM and Digital Output options
- Throttle Pump
- Injector trims
- Log Data (CTRL – D)
- View Data Log
Further description of the contents of the options menu is distributed throughout the manual.
3.1.5 Data Page Menu
This allows the user to access the engine data in online mode so they can deduce how their
engine is performing. The menus that access this are,
- Gauge Page
- Engine Data page.
- Firmware Version Info.
These shall be discussed in detail further on.