Specification Sheet
TD518030EN
10/22/2015
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
The Halo Surface LED Downlight (SLD) incorporates WaveStream™
technology to create an ultra-low profile surface mounting luminaire
with the performance and look of a traditional downlight. SLD6-1200
UNV series is designed for installation in many 4” x 2-1/8” deep square
junction boxes. Accessory mounting kit allows retrofit in 5” and 6” IC
and Non-IC recessed housings.* Suitable for residential or commercial
installations. Ideal for closets, storage areas, attics and basements.
Compliant with NFPA
®
70, NEC
®
Section 410.16 (A)(3) and 410.16 (C)(5).
CONSTRUCTION
• Die cast aluminum trim ring, and
die formed aluminum frame
OPTICS
• WaveStream™ technology
provides uniform luminance
from a low profile flat lens
• AccuAim™ optics provide
directional control for the
“cone-of-light” beam distribution
of a traditional downlight.
• Precision molded lens features
high transmission polymer with
UV stabilized protecting film
DESIGNER TRIMS
Accessories (sold separately)
SLD designer trims are accessory
rings that attach to the SLD for a
permanent finish.* Refer to SLD
accessories specification sheet for
details.
• White (Paintable)
• Satin Nickel
• Tuscan Bronze
*SLD accessory trims attach with
permanent adhesion and are not
interchangeable after installation.
ELECTRICAL JUNCTION BOX
MOUNTING
• SLD may be used in compatible
electrical junction boxes in direct
contact with insulation including
spray foam insulation
• Suitable for installation in many
4” x 2-1/8” deep square electrical
junction boxes.
• Driver consumes 3 cubic inches
of junction box.
• Compatible with other junction
boxes with accessory SLD6EXT
extension spacer ring.
• Surface mounting in a fire-rated
ceiling using an appropriate
electrical box offers a cost-
effective alternative to fire-rated
recessed housings
Note: Fire-rating is per the rating
of the ceiling and applicable
junction box, not the SLD.
• Installer must ensure
compatibility of fit, wiring and
proper mounting in the
electrical junction box.
This includes all applicable
national and local electrical and
building codes.
• Proprietary Slot-N-Lock quick
installation system for junction
box installation
• T-bracket with Slot-N-Lock
mounting tabs included
OPTIONAL - RECESSED HOUSING
MOUNTING
• Accessory SLD6ACCKIT required
for mounting in 5” and 6”
enclosed recessed housings
• May be installed in IC recessed
housings in direct contact with
insulation
* Note: Not for use in recessed
housings in direct contact with
spray foam insulation. Refer to
NEMA LSD 57-2013
• The SLD6 may be used with any
5 or 6 inch diameter recessed
housing constructed of steel
or aluminum with an internal
volume that exceeds 107.9 in³.
LED
• Linear LED arrays are
integrated in trim perimeter
• Color Temperature: 2700K, 3000K,
3500K, 4000K
• CRI options: 80 and 90
- 90 CRI can be used for
California Title 24 compliance/
certified to Title 20
- 80 CRI can be used to comply
with California Title 24 Non-
Residential Lighting Controls
as a LED luminaire.
WARRANTY
Cooper Lighting provides a five
year limited warranty on the
SLD LED
LED CHROMATICITY
• A tight chromaticity specification
ensures LED color uniformity,
sustainable Color Rendering
Index (CRI) and Correlated
Color Temperature (CCT) over
the useful life of the LED
• LED chromaticity of 3 SDCM
exceeds ENERGY STAR
®
color standards per ANSI.
• 90 CRI model features high
color performance with R9
greater than 50
• Every Halo LED is quality tested,
measured, and serialized in a
permanent record to register
lumens, wattage, CRI and CCT.
• Halo LED serialized testing and
measurement ensures color
and lumen consistency on a
per-unit basis, and validates
long-term product consistency
over time
ELECTRICAL CONNECTIONS
Junction Box
• Compatible with 4” x 2-1/8” deep
square boxes
• Supply Wire Adapter with LED
quick connector included
• LED connector is a non-
screwbase luminaire disconnect
for tool-less installation
Optional - Recessed
Housings
• Accessory SLD6ACCKIT required.
• LED connector is compatible with
Halo 5” H550 Series and 6” H750,
H2750 Series LED Housings
• LED Connector meets California
Title-24 high-efficacy luminaire
standard as a non-screw base
SLD6 1200 UNV
Series
Universal Voltage
SLD6128xxWHUNVJB
80CRI
2700K, 3000K, 3500K,
and 4000K
SLD6129xxWHUNVJB
90CRI
2700K, 3000K, 3500K,
and 4000K
6” Surface LED
Downlight
High Lumen 1200 Series
Universal Voltage
120V-277V
Suitable for
ceiling or wall
electrical junction boxes
ENERGY DATA
80 CRI 90 CRI
Lumens
(4000K models)
1215 1000
Input Voltage
120V-277V 120V-277V
Frequency 50/60 Hz 50/60 Hz
Input Current 0.12 A 0.12 A
Input Power 14.8 W 14.8 W
Efficiency
(4000K models)
82 lm/W 68 lm/W
THD ≤ 20%
Power Factor ≥ 0.90
T Ambient -30 - +40°C
Sound Rating Class A
2700K
nominal
80
CRI
2700K
3500K
4000K
3000K
80
CRI
2700K
3500K
4000K
3000K
3500K
nominal
80
CRI
2700K
3500K
4000K
3000K
4000K
nominal
80
CRI
2700K
3500K
4000K
3000K
2700K
nominal
90
CRI
2700K
3500K
4000K
3000K
3500K
nominal
90
CRI
2700K
3500K
4000K
3000K
4000K
nominal
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
2700K
nominal
80
CRI
2700K
3500K
4000K
3000K
80
CRI
2700K
3500K
4000K
3000K
3500K
nominal
80
CRI
2700K
3500K
4000K
3000K
4000K
nominal
80
CRI
2700K
3500K
4000K
3000K
2700K
nominal
90
CRI
2700K
3500K
4000K
3000K
3500K
nominal
90
CRI
2700K
3500K
4000K
3000K
4000K
nominal
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
90
CRI
2700K
3500K
4000K
3000K
nominal CCT
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Title 20 Appliance Efficiency Database.
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED Luminaire.
90CRI
LED
80CRI
LED
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Title 20 Appliance Efficiency Database.
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24 Non-Residential
Lighting Controls requirements as a LED Luminaire.
90CRI
LED
80CRI
LED
NOMENCLATURE
SLD612830 WH UNV JB
612 =
6” SLD 1200 Series
8 = >80 CRI
30 = 3000K
WH = Matte White
UNV = Universal Voltage 120V-277V
JB = Junction Box Kit only