Installation Guide

5
1. Edit the name of your motion sensor
2. Activate or deactivate your motion sensor. Turning
this off deactivates the sensor, allowing you to
control the floodlight or other associated devices
manually.
3. Change which Halo Home devices are controlled
by the motion sensor.
4. Define how the associated device or group reacts
to a motion event, and for how long.
5. Activate or deactivate Standby: how a device
reacts once the duration time has expired after a
motion event.
6. Define how the associated device or group reacts
in Standby mode, and for how long.
7. Set the sensitivity level of the motion sensor.
8. Set the sensitivity level of the photocell within the motion sensor.
ote:N Be sure to press “Save” after making changes to the settings to ensure
any changes are retained.
7
Adjusting the settings on your motion sensor
Motion Event and Standby Settings
1. Dimming: Set the dim level activated by a motion
event. The LED floodlight can dim from 100% to 5%.
2. Color Tuning: Set the color temperature (CCT)
activated by a motion event, or select one of the
presets. The LED floodlight has a CCT range of
3000K to 5000K.
3. Duration: Set the length of time these settings will
remain in effect when motion is detected.
ote:N This countdown timer continually resets as
additional motion events occur.
1
2
4
6
3
5
7
8
1
2
3