Installation Guide

Motion Sensitivity and Test Mode

1. Adjust motion sensitivity, or range, by using the

slider or the preset buttons.

2. Activate Test Mode to test the range of the motion

sensor, day or night, as you make adjustments to

the sensitivity. The associated device or group will

turn on for a few brief seconds between motion

events. Deactivate this mode after choosing the

sensitivity that works best for your application.

Photocell Sensitivity

1. Adjust the photocell sensitivity by using the slider

or the preset buttons.

2. The motion sensor only activates ﬁxtures at night.

Photocell sensitivity determines how dark it needs

to be for the motion sensor to begin doing this;

choose low sensitivity to have devices wait until

it is very dark at night to begin activating, while

stopping earlier in the morning at dawn. A high

sensitivity will activate the motion sensor as soon

as dusk begins, and keep it active until later in the

morning.