Installation Guide

4
5
6
ote:N Only one Device or Group can be selected. To control multiple
Devices, create a Group from the “Groups” screen in the main
menu, then return to the Controller Settings screen to associate
the motion sensor to that group.
Adding the motion sensor to the app
1. From the Devices or Controllers
screens, press “+” at the top right of
your screen.
2. The app will search for your motion
sensor.
3. Once discovered, select the motion
sensor and press “Done.” It may take
up to 30 seconds for this process to
complete.
4. Once complete, the blue LED indicator
on the bottom of the motion sensor
will blink twice and then remain on to
indicate it has been claimed.
MOTION SENSOR
Tap to add
MOTION SENSOR
Tap to add
Associate the motion sensor to Halo Home devices
1. The Controller Settings screen will appear for your motion sensor.
Press “Associate” or “Tap to select.”
2. Select the Device or Group to be controlled by your motion sensor
and press “Save.”