Specification

SPECIFICATION FEATURES continued
Ground Connection
• Separategroundingcable
included on the module for
attachment to the housing
during installation.
LED Driver
• Driverisuniversalvoltage
120V-277V, and may be
controlled from a switch in
this range of main inputs
(switchable at 120V, 220V, 230V,
240V, and 277V)
• Driverisdimmableat120V
operation when connected to a
compatible dimmer.
• Driverisahighefficiency,
electronic power supply
providing DC power to the LED.
• DrivermeetsFCCEMI/RFI
Consumer Level limits on 120V
main inputs, and is suitable
for use in residential and
commercial installations.
• Driverfeatureshighpower
factor, low THD, and has
integral thermal protection in
the event of over temperature
or internal failure.
• Driverisreplaceable,if
replacement should be
required.
Dimming
• HaloML56LEDSystem
is designed for dimming
capability to 15% in normal
operation with standard 120V
electronic low voltage, LED-
Rated, and many incandescent
dimmers. The ML56 Light
Module has dimming capability
to 5% with select dimmers
with low end trim adjustment.
(Consult dimmer manufacturer
for dimmer compatibility and
details. Note, some dimmers
require a neutral in the
wallbox.)
Warranty
• CooperLightingprovidesa
(5) five year limited warranty
on the Halo ML56 LED Light
Module.
LED Module in New or Retrofit
Existing Construction – Housings
other than Halo or All-Pro
• Ifusedinrecessedhousings
other than Halo or All-Pro the
Cooper Lighting 5-year limited
warranty applies to the LED
Light Module and Trim only.
• Aswithanyelectrical
installation, a qualified
electrician must ensure
compatibility of use with a
particular housing; this includes
all applicable national and
local electrical and building
codes. Installer is responsible
to properly and securely retain
the LED Module and LED
Trim in the housing at time of
installation.
COMPLIANCE
Labels
• UL/cULListed1598Luminaire
(Halo and All-Pro housings)
• CEMarking-“Conformité
 Européene”conformitywith
the Council of European
Communities Directives,
meeting internationally
recognized compliance when
used with H550 and H750 LED
housings
• UL/cULListedforDamp
Location
• UL/cULListedforWetLocation
(Protected Ceiling) with baffle
and reflector trims
• IP66ratedwithbaffleand
reflector trims
• RoHSCompliant
• MaybeinstalledinIChousings
in direct contact with air
permeable insulation and
combustible material
• ULClassifiedwhenusedin
retrofit with listed housings
(See Housing Compatibility)
Qualification
• ENERGYSTAR
®
qualified as
registered in the “ENERGY
STAR
®
Qualified Products List”
• MaybeusedforStateof
California Title 24 high efficacy
LED luminaire compliance,
as registered in the State of
California Energy Commission
“Appliance Database”
• MaybeusedforInternational
Energy Conservation Code
(IECC) high efficacy luminaire
compliance
• MaybeusedforWashington
State Energy Code (WSEC) high
efficacy luminaire compliance
AIR-TITE™
Certified under ASTM-E283
to meet insulated ceiling and
restricted air-flow requirements
such as:
• InternationalEnergy
Conservation Code (IECC)
• WashingtonStateEnergyCode
(WSEC)
• NewYorkStateEnergy
Conservation Construction
Code (NY-ECCC)
• StateofCaliforniaTitle24
“Recessed Luminaires in
Insulated Ceilings”
ML56 LED
System
600 Series / 80 CRI
ML5606827
ML5606830
ML5606835
ML5606840
5-Inch and 6-Inch
600 Lumen LED
Light Module for
New Construction,
Remodel and Retrofit
For use with 59x and 69x
Series Trims
FOR USE IN
INSULATED CEILING
AND NON-INSULATED
CEILING RATED
HOUSINGS
HIGH EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
Qualied and compliant. Refer to ENERGY STAR®
Qualied Products List and CEC (T24) Appliance
Database for listings.
DIMENSIONS
ML56 LED System
600 Series / 80 CRI
4-1/2"
[114 mm]
3"
[76 mm]
www.cooperlighting.com