Manualshelf

Cut Sheet

ManualsBrandsHalo ManualsIndoor Lighting - TraditionalLazer Single Circuit Track, 6', White
1
334
TRACK LIGHTING System
COOPER LIGHTING
LAZER
The Lazer Two-Conductor track is
available in two finishes and 4 lengths.
The overall height is only 9/16” and
the track has a decorative reveal at the
ceiling line. It accepts both Lazer Track
lampholders and Halo Power-Trac
lampholders.
Size
Lazer Track is only 9/16” (14mm) deep
by 1 3/8” (35mm) wide.
Finishes
Available in White (P) and Black (MB)
Connectors
Connectors push into the ends of the
Track. Straight, right angle and flexible
connectors allow track to be assembled
in almost any pattern.
Grounding
Grounding is accomplished through a
grounding channel in the track. The track
maintains continuity to the building’s
grounding system through the ground
contact fingers in each of the connectors.
Specifications
The structural channel is extruded
aluminum with .050” nominal wall
thickness. Conductors are solid copper
buss bars encased in rigid extruded
PVC insulators. Polarized connectors
and end caps are molded polycarbonate.
Electrical capacity is 20 AMPS. Lazer
Track is UL listed and CSA certified.
Polarity
A visual polarity line on Lazer Track
indicates proper electrical installation.
Simply line up polarity on Lazer Track
and lampholder adapter.
LZR102, LZR104,
LZR106, LZR108
• LZR102 – 2’ Track. Actual length 20 1/8”
(511mm). Color Codes: P, MB
• LZR104 – 4’ Track. Actual length 44 1/8”
(1121mm). Color Codes: P, MB
• LZR106 – 6’ Track. Actual length 68 1/8”
(1730mm). Color Codes: P, MB
• LZR108 – 8’ Track. Actual length 92 1/8”
(2340mm). Color Codes: P, MB
ACCESSORIES
LZR210 Monopoint Feed – Low Voltage
For installing one Lazer low voltage lampholder.
Mounts directly to junction box. 500 watt
maximum.
Color Codes: P, M B
LZR209 Monopoint Feed
For installing one Halo or Lazer track
lampholder. Mounts directly to junction box. 500
watt maximum. Not compatible with Halo or
Lazer low voltage lampholders with integral solid
state power supplies.
Color Codes: P, M B
LZR207 T-Bar Mounting Clip
For installing track to a suspended ceiling.
Kit contains 3 clips for mounting 2’, 4’, 6’,
or 8’ track. Order one kit for each track section.
Compatible with Halo and Lazer track.
LAZER
™
BY HALO
®

Summary of content (1 pages)