Specification

HLB6
6-Inch Ultra-thin LED
Lens Downlight with
Remote Driver / Junction
Box
Up to 1100 Lumens
Field Selectable CCT
TD518318EN
August 29, 2018 3:26 PM
Catalog #
Project
Comments
Prepared by
Type
Date
HALO
SPECIFICATION FEATURES
DESCRIPTION
The HLB6 is a 6-inch ultra-thin LED lens downlight with remote driver
/ junction box suitable for new construction and remodel applications.
Field selectable color temperature and high color rendering provide
excellent color performance. Simplified installation in drywall or
suspended ceilings eliminates recessed cans saving time and money.
Installs from below the ceiling in as little as 2” plenum height, can be
used in direct contact with insulation and is airtight. Use for general
area lighting in low to medium height ceilings where energy savings,
long life and economy are required.
HOUSING
• Die cast aluminum mounting
frame with integral flange
provides passive thermal cooling
achieving L70 at 50,000 hours in
IC and non-IC applications
• High impact diffuse lens provides
shielding to the light guide
minimizing pixilation.
GASKET
• Closed cell gasket achieves
restrictive airflow and wet
location listing without additional
gaskets or caulking
OPTICS
• Precision acrylic light guide
organizes source flux into wide
distribution with 1.32 spacing
criteria, useful for general area
illumination
LED ARRAY
• Plurality of mid power LED’s
provides a uniform source with
high efficiency and long life
• Available in 90 CRI minimum,
R9 greater than 50 and color
accuracy within 4 SDCM
providing color uniformity
• Field selectable color
temperature, select 2700, 3000,
3500, 4000 or 5000 K CCT
• Meets ENERGY STAR
®
color
angular uniformity requirements,
deviation is less than 0.006 u’ v’
REMOTE DRIVER / JUNCTION
BOX
• Aluminum driver / junction box
with captive hinged junction box
cover
• Listed for (6) #12 AWG 90˚ C splice
conductors, 2-in, 2-out plus (2)
ground
• (2) ½” conduit pry-outs
• (2) Slide-N-Side™ non-metallic
(NM) wire traps allows wiring
outside the box
• Accepts 14-2, 14-3, 12-2, 12-3 U.S.
and 14-2, 14-3, 12-2 Canadian NM
cable
• (3) 4-port push wire nuts with
clear caps for quick and reliable
mains voltage connections
• Integral keyhole mounting
slots facilitate direct mounting
to building structure or new
construction mounting frame
DRIVER
• 120V 60 Hz constant current
driver provides noise free
operation
• Continuous, flicker-free dimming
from 100% to 5% with select
leading or trailing edge 120V
phase cut dimmers
• Plenum rated inline electrical
quick connect provides low
voltage connection to fixture
fitting
INSTALLATION
• Can be installed in 1/2” to 1-1/4”
thick ceilings
• Cutout utilizes standard round
hole saw sizes, cutout template
provided
• Heat treated springs hold fixture
fitting securely in the ceiling
eliminating light leaks
• Housing is less than ½” thick and
can span a 2” nominal framing
member
• Can be removed from below the
ceiling for service or replacement
OPTIONAL MOUNTING FRAME
• Pre-galvanized steel mounting
frame locates fixture fittings
during electrical rough in and
provides cutout guidance for
drywall contractor
• Provides tool-less attachment of
remote driver / junction box
COMPLIANCE
• cULus certified type IC suitable
for direct contact with air
permeable insulation
• Not recommended for use in
direct contact with spray foam
insulation, reference NEMA
LSD57-2013
• Wet location listed
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets
when installed in accordance
with the NEC 410.16 spacing
requirements
• EMI/RFI emissions per FCC 47CFR
Part 15 consumer limits
• Contains no mercury or lead and
RoHS compliant
• Photometric testing in accordance
with IES LM-79-08
• Lumen maintenance projections
in accordance with IES LM-80-08
and TM-21-11
• Can be used for State of
California Title 24 high efficacy
LED compliance under JA8,
reference Modernized Appliance
Efficiency Database System
(MAEDBS) for 2016 JA8 High
Efficacy Lighting
• ENERGY STAR
®
certified,
reference “Certified Light
Fixtures” database
WARRANTY
• Five year limited warranty,
consult website for details.
www.eaton.com/lighting/legal
ENERGY DATA
Lumens 900 Series
Input Voltage 120V
Input Current 132 (mA)
Input Power 16.0 (W)
Efficiency 66 (LPW)
Inrush (A) 2.1 A @ 14mS
THD ≤ 20%
PF ≥ 0.90
T Ambient -30° - +40°C
Sound Rating ≤ 20dba
Refer to ENERGY STAR
®
Certified Products List.
Can be used to comply with California Title 24
High Efficacy requirements.
Certified to California Appliance Efficiency
Database under JA8.