User's Manual

Copyright © 2010 Halo Monitoring 6
Wearing the Halo Transmitter
Step 1
Remove the strap and the transmitter module from the myHalo box. Loosen the strap and snap it
to the transmitter on one side. Be sure to match the strap’s LEFT side to the transmitter’s left (L)
side. Carefully align the snaps and press firmly to connect. See Figure 1.
Figure 1. Connecting the Strap to the Transmitter
Step 2
Under your clothing, wrap the strap around your upper torso and connect the strap’s RIGHT side
to the transmitter’s right (R) side. Make sure the Halo emblem is right-side-up and appears as
shown in Figure 2. The silver button sensor on the back of the transmitter should be touching your
skin.
Figure 2. Proper Fitting of the Transmitter
Step 3
Adjust the strap to fit properly. Follow these simple guidelines and refer to Figure 2 for optimum
transmitter performance:
• Wear the strap on your upper abdomen, no more than two inches below your sternum.
Match the strap’s LEFT side... ...with the transmitter’s left (L) side.
TRANSMITTER BACK
STRAP
Note proper location of Halo emblem.