User's Manual

Copyright © 2010 Halo Monitoring 12
Appendix B: Indicators
The home gateway has multiple indicators on the front (see Figure 5) that provide information
about its current state. These indicators are LEDs that illuminate in various colors, depending on
the status. Refer to Table 1 for descriptions of each indicator.
Figure 5. Home Gateway Front Panel
Table 1. Indicators
Indicator Description
POWER LED Solid green - The home gateway is powered on.
STATUS LED Flashing green once per second - Conditions are normal.
WAN LED The WAN LED represents the status of the Internet or Phone Line
connection, depending on which method is being used.
Internet connected systems:
Solid green - The home gateway has established a connection with the health
server.
Solid red - There is a problem with the connection.
Phone Line connected systems:
Off - Normal
Solid Green - Normal, gateway is using the line
Solid Amber - Line is in use or off-hook
Solid Red - Gateway is unable to dial-in or communicate with the server
PAN LED Solid green - The home gateway has established a connection with the chest
strap transmitter.
Solid red - There is a problem with the connection.
BATTERY LED Solid green - The battery level is above 40%.
Solid amber - The battery level is between 20% and 40%.
Solid red - The battery level is below 20% and needs charging.
Flashing - The transmitter is plugged in and the battery is being charged.
The LED color indicates the current charge level as specified above.
ALARM LED/
RESET Button
Solid red LED and audible alarm - An alarm condition is detected. To disable
the alarm, press the RESET button on the home gateway's front panel.