User's Manual

myHalo™ Quick Start Guide 3
Charging Battery
Keep the transmitter charged. It is recommended that you charge the transmitter
once a day.
Step 1
Remove the strap by disconnecting one of the snaps.
Step 2
Open the battery charge port by pulling on the plastic plug. Insert the charger plug
into the charge port. Connect the other end to your electrical outlet as shown in
Figure 3.
Step 3
Remove from the charger after 1-1.5 hours or when the battery is fully charged.
Close the battery plug (to ensure the device remains water tight) and put the strap
back on your body.
Figure 3. Charging the Battery