Specification
HLB6 Series
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2020 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions
subject to change without notice.
PS518163EN page 3
September 11, 2020 11:50 AM
Product Specications
Wireless System
• For use with the HALO Home mobile app
• Bluetooth low energy (BLE) mesh allows on/off,
white tuning and dimming to be controlled wirelessly
with companion wall stations, smart phones and
tablets using HALO Home mobile application
• Setup Groups, Scenes and Schedules to automate
lighting with the HALO Home mobile app
Wireless Pairing
• See HALO Home Quick Start Guide for
wireless setup, guidance and troubleshooting:
BringHaloHome.com
Bluetooth Mesh
• HALO Home products work better together
Smartphone(s) will need to be within range of
HALO Home device to control (~35 ft)
• Device-to-device communication is ~100 ft line-of-
sight
• Expand and strengthen the Bluetooth network range
by adding HALO Home devices. Learn more at
BringHaloHome.com
Gasket
• Closed cell gasket achieves restrictive airow and
wet location listing without additional gaskets or
caulking
Optics
• Precision acrylic light guide organizes source ux
into wide distribution with 1.4 spacing criteria, useful
for general area illumination
LED Array
• Plurality of mid power LED’s provides a uniform
source with high eciency and long life
• 90 CRI minimum; R9 greater than 50 provides high
color rendering
• Color is tunable through the HALO Home app
• Meets ENERGY STAR
®
color angular uniformity
requirements; Deviation is less than 0.006 u' v'
Remote Driver/Junction Box
• Pre-galvanized steel driver/junction box with captive
hinged cover
• Listed for six #12 AWG 90° C splice conductors: two
in, two out plus two ground
• Two 1⁄2" conduit pry-outs
• Two Slide-N-Side™ non-metallic (NM) wire traps
allows wiring outside the box
• Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.)
and 14-2, 14-3, 12-2 (Canadian)
• Three 4-port push wire nuts with clear caps for quick
and reliable mains voltage connections
• Integral mounting holes facilitate direct mounting to
building structure or mounting frame
• 6-, 12-, and 20-ft extension cables available for
centralized junction box installation
Driver
• Available in 120V providing noise free operation
• Continuous icker-free dimming down to 5% with
HALO Home Controllers (Accessory & Anyplace
Dimmers and Scene Keypad)
• Plenum rated inline electrical quick connect provides
low voltage connection to xture tting, CMP/FT6
rated
Installation
• Can be installed in 1/2" to 1-1/4" thick ceilings
• Cutout utilizes standard round hole saw sizes;
cutout template provided
Hole Saw Sizing Min Max
HLB6” 6” 6 1/4”
• Heat treated springs hold xture tting securely in
the ceiling eliminating light leak
• Housing is less than 1⁄2" thick and can span a 2"
nominal framing member
• Can be removed from below the ceiling for service
or replacement
Optional Mounting Frame
• Pre-galvanized steel mounting frame locates xture
ttings during electrical rough-in and provides
cutout guidance for drywall contractor
• Provides attachment of remote driver/junction box
Compliance
• UL Certied type IC suitable for direct contact with
air permeable insulation
• Not recommended for use in direct contact
with spray foam insulation (reference NEMA
LSD57-2013)
• Wet location listed and IP44 ingress protection
• Airtight per ASTM-E283-04
• Suitable for use in clothes closets when installed
in accordance with the NEC 410.16 spacing
requirements
• EMI/RFI emissions per FCC 47CFR Part 15
consumer limits
• Contains no mercury or lead and RoHS compliant
• Photometric testing in accordance with IES
LM-79-08
• Lumen maintenance projections in accordance with
IES LM-80-08 and TM-21-11
• State of California Title 24 high ecacy
• LED compliance under JA8, reference Modernized
Appliance Eciency Database System (MAEDBS)
for 2019 JA8 High Ecacy Lighting
• ENERGY STAR
®
certied (reference “Certied Light
Fixtures” database)
Warranty
• Five-year limited warranty