Installation Guide
x1
x1
x4 x4
x1
Step 3:Attach right side panel(B) and left side panel(C) to table top(A)
using bolts(N) .
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Carefully and gently to prevent damage to the burner equipment.
Step 4:Align the holes around the burner (J) with the holes on the Left
Side Panel(C).
NOTE:Carefully and gently to prevent damage to the burner equipment.
B
N
C
A+J
1/4*15
17
T