Installation Guide

Step 1:Connect the gas cylinder base (E) to the front panel (F) with bolts
(M).
NOTE:Please fully tighten all bolts at this time.
Step 2:Align the holes at both ends of the connecting rod (H) to the
h
oles of the front panel(F) and the gas cylinder base(E)
respectively,and then fix them with bolts(L).
NOTE:Please fully tighten all bolts at this time.
M
E
x1
x2 x4
x1 x1
x2
H L
F O
1/4*35
M
16
1/4*12